1. مهمان گرامی، جهت ارسال پست، دانلود و سایر امکانات ویژه کاربران عضو، ثبت نام کنید.
    بستن اطلاعیه

آموزش ایندیزاین - کار با دسته های متنی و تطابق گزینه های محتوا در محیط Adobe InDesign

شروع موضوع توسط Amon Amarth ‏7/5/13 در انجمن A.Indesign

  1. کاربر ارشد

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    12,082
    تشکر شده:
    28,151
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    [h=2]آموزش ایندیزاین - کار با دسته های متنی و تطابق گزینه های محتوا در محیط Adobe InDesign
    [/h]

    [​IMG]

    آموزش کار با دسته های متنی و تطابق گزینه های محتوا در ایندیزاین


    در Adobe In Design می توان دسته های متن را حول یک شئ قرار دهید که شامل کادر متن ها و تصاویر وارد شده است. روش های گوناگونی برای انجام این کار وجود دارد و می توان یک سری تنظیمات را که برای فاصله بین متن و قاب تصویر است را تعیین کرد. در آموزش زیر درباره تصاویر اولیه و جای گیری متن در ایندیزاین سخن می گوییم.

    جزییات آموزش
    - برنامه: Adobe InDesign CS4
    - زمان مورد نیاز برای تکمیل طرح: 15 دقیقه


    پیش نمایش تصویر نهایی
    شکل زیر نمونه تصویر پشت و روی کوپن است که در پایان این آموزش باید به آن دست پیدا کنیم.

    [​IMG]




    دانلود
    حجم فایل: 1.59 مگابایت

    منبع: persiangfx
     
    یک شخص از این تشکر کرد.
  2. کاربر ارشد

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    12,082
    تشکر شده:
    28,151
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    پاسخ : آموزش ایندیزاین - کار با دسته های متنی و تطابق گزینه های محتوا در محیط Adobe InDesign

    آموزش به زبان انگلیسی



    [h=2]Activate Text Wrap[/h]
    To activate this option go to: Window > Text Wrap (Option + Command + W).[​IMG]
    There are five options to choose from:

    • [*=left]No text wrap (A): Object is placed over or below text (depending on your layer distribution) without interrupting it.
      [*=left]Wrap around bounding box (B): Text is distributed according the bounding box around the frame; this mean whatever shape your container is, it will always have a square or rectangle frame around it and this will be the area used for text wrap.
      [*=left]Wrap around object shape (C ): Text is accommodated alongside the container form following its shape.
      [*=left]Jump object (D): Object is left alone without text at its right and left sides.
      [*=left]Jump to next column (E): Like the last option but in this case no text is left after the object, the remaining content is displaced to the next column.
    [​IMG]
    All of the wrap options, except the first, let you select the distance you want between object and text; this distance is called offset. You can modify it by inputting a value in any of the desired sides, take note if the "chain" icon is selected all of the settings will have the same size.[​IMG]
    In the following picture the chain icon has been deactivated and only top and bottom values were added; notice the right and left margins are just next to the text.[​IMG]
    [HR][/HR]

     
    یک شخص از این تشکر کرد.
  3. کاربر ارشد

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    12,082
    تشکر شده:
    28,151
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    پاسخ : آموزش ایندیزاین - کار با دسته های متنی و تطابق گزینه های محتوا در محیط Adobe InDesign

    [h=2]Additional Wrap Options Features
    [/h]
    If you use any of the "Wrap Around" options there are some additional settings you can select. To activate this panel click over the menu icon on the top right corner of the Text Wrap window and select "Show Options".[​IMG]
    Wrap to:

    • [*=left]Right side
      [*=left]Left side
      [*=left]Both right & left sides
      [*=left]Side towards spine
      [*=left]Side away from spine
      [*=left]Largest area
    The first wrap options are pretty much self explanatory; text can be fit to the right (A), left (B) or both right and left (C) sides of the object. The last option is "Largest Area" (D) which compares the right and left spaces and fit the text at the largest. Note: if you change the object frame position and vary the areas, text will automatically fit into the new largest one.[​IMG]
    The options which are not very clear at first are: "Side towards spine" and "Side away from spine". Spine is the region where two facing pages meet; for example where the paper is folded in a magazine. Now you know what spine is, in this particular case, the function of these options are understandable. You can fit the text towards the spine (E) or away from it (F).[​IMG]
    [​IMG]
    [​IMG]
    When you use "Wrap around object shape" some additional options are activated, these are the "Contour options":

    • [*=left]Bounding Box: text is wrapped around the bounding box.
      [*=left]Detect Edges: wraps around the frame shape automatically.
      [*=left]Alpha Channel: This option is displayed only if the image has been saved with alpha channel information. InDesign recognizes the default transparency from Adobe Photoshop as an alpha channel.
      [*=left]Photoshop Path: This option is displayed only if an image path is available. Select a path from the Path menu to generate the wrap shape.
      [*=left]Graphic Frame: Generates the limits according to the object frame.
      [*=left]Same as Clipping: The area is defined from the clipping path of the image.
    Also you may have noticed there is an "Invert" checkbox right next to the Text Wrap icons; activating that option just does what it says, it inverts the area of the wrap.[​IMG]
    Finally; if your image has some empty space inside it you use that space for including text by checking the "Include inside edges" option.[​IMG]
    [HR][/HR]
     
    یک شخص از این تشکر کرد.
  4. کاربر ارشد

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    12,082
    تشکر شده:
    28,151
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    پاسخ : آموزش ایندیزاین - کار با دسته های متنی و تطابق گزینه های محتوا در محیط Adobe InDesign

    [h=2]Using the Fit Content Options
    [/h]
    To insert content in a frame (A) going to "File > Place" (Command + D). A window will prompt where you can select which file you’d like to use. Select it and the mouse will change showing a small thumb (B), now click over the frame to insert it (C); for this case as the picture is much bigger than the frame only a small portion of it is displayed.[​IMG]
    [​IMG]
    InDesign has five options to fit content into frames; select any of the frames and the option will be visible near the right side of the tools menu.[​IMG]
    Each option is pretty much self explanatory and their use is just according to our needs. The five options are:

    • [*=left]Fit content to frame (A) (Option + Command + E)
      [*=left]Fit content proportionally (B) (Option + Command + C)
      [*=left]Center content (C) (Shift + Command + E)
      [*=left]Fit frame to content (D): (Shift + Option + Command + E)
      [*=left]Fit frame proportionally (E): (Shift + Option + Command + C)
    [​IMG]
    You can also accede to these options by Command + Clicking over the image and look for the "Fitting" section.[​IMG]
     
    یک شخص از این تشکر کرد.